Trotec MultiMeasure Basic BZ 30 Manual De Instrucciones página 25

The graph now displays three channels: the channel for
CO (red), the temperature link (green) and the relative
2
humidity (blue).
Set Scale Format
Time Scale:
Scaling of the horizontal axis is controlled by the Time
Scale section. To set the end points of the horizontal axis,
select the specified endpoints from the drop-down date
and time selectors.
Auto Scale:
The horizontal scale start point is the start time of the
logger data file, the end point is the end time of the log-
ger data file.
Custom Scale:
The horizontal scale start point and the end point can be
changed by the user.
EN
m If the custom scale is selected and the input start
point is lower than the start time of the logger
data file, the start point of the graph time scale
will still be the start time of the logger data file.
If the custom scale is selected and the input
end point is over the end time of the logger
data file, the end point of the graph time scale
will still be the end time of the logger data file.
Vertical Scale:
Select the measuring channel and unit. Then set the
channel's minimum and maximum value.
Auto scale:
Selecting this item will allow the vertical scale to change
automatically, as determined from the plotted data.
Operating Manual – CO air quality data logger
2
B - 9