Specifications - Sony WRR-800A Manual De Instrucciones

Specifications

Tuner
Reception type 110KF3E
Circuit system Dual conversion superheterodyne
Reception frequencies
794.125 to 805.875 MHz
Local oscillators
Crystal controlled PLL synthesizer
Selectivity 60 dB or more (at ±250 kHz detuned)
Spurious rejection ratio
70 dB or more
Image rejection ratio
70 dB or more
1)
Muting level 30 dBµ
Antenna connectors
BNC-R type (2), 50 ohms
Frequency response
100 to 15,000 Hz ±3 dB
De-emphasis 50 µsec
Signal-to-noise ratio
30 dB or more at an A-weighted RF input
level of 20 dBµ
60 dB or more at an A-weighted RF input
level of 60 dBµ
(±5.0 kHz deviation at 1 kHz modulation)
Distortion 1% or less (±40 kHz deviation at 1 kHz
modulation)
Tone signal frequency
32.768 kHz
16
2)
Output level 0 dBm (±16 kHz deviation at 1 kHz
modulation)
(–20 dBm (±5 kHz deviation at 1 kHz
modulation))
Output impedance
150 ohms
Output connector
ø6.3 phone balanced (
1) 0 dBµ=1 µV
2) 0 dBm=0.775 Vrms (600 ohms loaded)
General
Power requirements
9 V DC
Current consumption
Approx. 500 mA
Operating temperature
0°C to 40°C (32°F to 104°F)
Storage temperature
–20°C to +55°C (–4°F to +131°F)
218 × 44 × 210 mm
Dimensions
× 1
5 3
(8 / /
8 4
Mass Approx. 1.6 kg (57 oz)
Accessories supplied
AC power adaptor (1)
Antennas (2)
Operating Instructions (1)
Design and specifications are subject to change without
notice.
1
/ inch TRS)
4
× 8
3
/ inches) (w/h/d)
8