Sunbeam FPSBDML920 Manual De Instrucciones página 3

LEARNING ABOUT YOUR
DONUT MAkER
Lid latch
Holds the donut maker
closed to make 5 fun
donuts with a hole.
Power / Bake Ready
Indicators
Indicates that the donut
maker is on and heating.
Non-stick coating
Non-stick plates for easy
cleaning.
Donut holes
Create 5 delicious donuts
in minutes.
-4-
HOW TO USE
1. Insert the plug into a 120 volt power outlet.
2. Allow your donut maker to pre-heat until the 'BAKe ReAdY' light
comes on. This indicates that the cooking plates have reached the correct
temperature for cooking.
3. For best results, lightly spray the cooking plates with a cooking oil spray
before using. This will assist in the removal of the donuts after cooking.
4. divide mixture into pan holes as per recipes using a spoon, fabric piping
bag or pitcher.
NOTE: do not use disposable plastic piping bags as these may melt if they come
into contact with hot plates. Surfaces are HoT.
5. Gently close the lid, ensuring the latch locks into place. do not slam the
lid down as it may cause the mixture to run off the cooking plates.
6. Allow to cook for approximately 6 minutes or until golden.
7. To remove donuts, always use a plastic or wooden spatula. Never use
a sharp object or metal, as this will damage the non-stick surface of the
cooking plates.
-5-