Other Features - Rimax RB310 Manual De Instrucciones

Pull out the Aroma oil holder, fill the Aroma oil ,install the holder back to the unit base.
Note: It is normal if there is a little of mist overflows from the nozzle at the beginning of working.
CLEANING YOUR ULTRASONIC HUMIDIFIER
Note: When cleaning the inside of the unit, keep the water away from the air outlet.
■ The method of keeping clean:
Using purified water
Cleaning the base of unit, water tank and ultrasonic transducer every week
Always change to use clean water.
Always drain the water tank when not in use.
Clean all parts of the humidifier before storing by wiping with a damp cloth, and buffing with a
dry cloth.(Except for the electrical control when the unit is off, any part of the humidifier may be
wiped with a soft damp cloth, and buffed with a dry cloth ,ensuring the unit is unplugged.)
The methods of cleaning the connector:
■
To clean the dirty surface with a soft brush.
Rinse the transducer with clean water.
■ The methods of cleaning the base of unit:
Clean the dirty flume with soft cloth
If there is dirty on the surface of the protective switch of water line, using soft brush to clean
Wash the flume with clean water.

OTHER FEATURES

In cold weather, windows, and even some walls may fog or develop frost from excessive indoor
humidity. If this occurs, reduce the mist intensity setting to avoid damage from condensed water
dripping on windowsills.
Too much humidity in the room may allow moisture to accumulate on surfaces where bacteria and
fungi can grow. Collected moisture may also harm furniture, and walls, especially wallpaper.
To eliminate too much humidity, especially in a small room, leave the room door open, add adjust
the mist intensity control setting.
SPECIFICATIONS
Model No. JSS-12801
Voltage 230V
Frequency 50Hz
Consumption 28W
≥260ml/h
Moisture output
≤35dB(A)
Noise
10
Water tank Capacity
Net Weight
Gross Weight
2.8Litres
1.3Kg
.8Kgs