General Safety Instructions; Safety Instructions For All Operations - Festool DSC-AG 125 Manual De Instrucciones

Dia cutting system DSC-AG 125
1 Technical data
Exhaust Cover
Tool
Disc thickness
with a bar
without a bar
Cut depth (without a guide bar)
Exhaust hose
Weight
Angular grinder
Voltage
Frequency
Input
Idle revolutions
Peripheral velocity
Grinding spindle thread
Limits to interaction current
Constant electronics
Heat protection
Weight
Protection level
2 Symbols
Double insulation
Warning of general danger
Risk of electric shock
Use protective goggles!
Wear ear protection!
Read the instructions
Not to be included in municipal refuse

Advice or tip
3 Control elements
[1-1] Arresting button
[1-2] Exhaust Cover
[1-3] Power cable
16
GB
DCC-AG 125
125 mm
max. 3 mm
max. 6.5 mm
27 mm
27/36 mm
2.2 kg
AG 125-14 D
220 – 240 V~
50 / 60 Hz
1400 W
11 000 min
80 m/s
2,3 kg
[1-4] Angular grinder
[1-5] Switch
[1-6] Threading for clamping and additional
handle
[1-7] Spindle locking plunger
[1-8] Rollers
[1-9] Screw for setting bar clearance
[1-10] Bar guide
[1-11] Gear box
[1-12] Bar guide
[1-13] Cut indicator
[1-14] Additional handle
Accessories that are illustrated or described here
are not always included in the scope of delivery.
The specifi ed illustrations can be found at the be-
ginning of the operating instructions.
4 Intended use
–1
Consisting of an angle grinder and extraction
hood, the Dia cutting system is designed for
M 14
grooving and cutting into concrete or stone ma-
•
terials without the use of water.
•
The user proper is responsible for improper us-
•
age.
II /
5 Notes on Safety Prevention
5.1

General safety instructions

WARNING! Read all safety warnings and
all instructions. Failure to follow the warn-
ings and instructions may result in electric
shock, fi re and/or serious injury.
Save all warnings and instructions for future
reference.
The term „power tool" in the warnings refers to
your mains-operated (corded) power tool or bat-
tery-operated (cordless) power tool.
5.2

Safety instructions for all operations

General safety instructions for grinding, abra-
sive cutting and wire brushing:
a) This power tool is intended to function as
grinding, sanding with sandpaper, wire brush-
ing and abrasive cutting. Read all safety warn-
ings, instructions, illustrations and specifi ca-
tions provided with this power tool. Failure to
follow all instructions listed below may result
in electric shock, fi re and/or serious injury.
b) Operations such as polishing is not recom-
mended to be performed with this power tool.
Operations for which the power tool was not
designed may create a hazard and cause per-
sonal injury.