Technical Data - Martin Yale papermonster TG20 Instrucciones De Uso

GB
REPLACE THE CUTTING MAT
- Take out the cutting mat with one finger from
the groove, which is far from the cutter head.
- Insert the new cutting mat to original posi-
tion.
- A spare cutting mat is stored in the guide rail.
When you need to change cutting mat, you
can take it out shown as Fig 7.
Figure 7
MALFUNCTION
DISPOSING OF THE MACHINE:
Dispose of the machine in an envi-
ronmentally sound fashion at the
end of its usefull service life. Do not
dispose of any of the parts included
in the machine or its packing with
household trash.
Description
XXXXX
Note: For orders of special accessoires and spare parts, please contact your dealer.
Cutting capacity:
Cutting length:
Weight:
REPLACE THE CUTTER HEAD
When the cutting blade is damaged or the edge
is not sharp, you need to change the cutter head.
It's shown as Fig 8.
- Pull out the end cap from the base
(see Fig 8A)
- Draw out the guide rail from the base
(see Fig 8B)
- Replace the cutter head with a new one
(see Fig 8C)
SPECIAL ACCESSOIRES

TECHNICAL DATA

guillotine: 10 sheets
straight: 5 sheets
skip: 3 sheets
wave: 3 sheets
round corner: 1 sheet
guillotine: 330 mm
rotary: 330 mm
2.4 kg
TRIMMER
Figure 8
Order-No.
xxxxx
7 7
HOW TO OPERATE THE ROUND
CORNER CUTTER
- Insert the material into the round corner cut-
ter (see Fig 9A)
- Press down the presser button to fillet corner
(see Fig 9B)
Figure 9
- Draw out the waste bin completely, and emp-
ty wastepaper regularly (see Fig 10)
Figure 10
TG20