Velleman RIKOMAGIC MK802IIIS Manual Del Usuario página 4

3. Overview
Refer to the illustrations on page 2 of this manual.
1
HDMI port
2
reset button
3 micro SD port
4. Connecting the device
The device has the following ports and buttons:
1 HDMI port
2 Reset button
3
Micro SD port
4
USB port
5
Micro USB
power port
6 USB port
5. Start using the device
To start using the device:
1.
Connect the device on the HDMI port of your TV, monitor or
beamer.
2.
(For TV only): Use your TV remote control to select the mini
computer as the HDMI source (as you would do with another
HDMI source).
The start screen of the mini computer will appear.
6. Shutting down the device
To shut down the device:
1. In the toolbar at the bottom, click the
2.
Wait until the device has shut down to disconnect it.
V. 02 – 12/09/2013
PCTV2
4
USB OTG port
5
micro USB power port
6 USB port
Plug the HDMI port of the device directly to
the HDMI port of your TV, monitor or
beamer, no cable needed.
Press to reset the device.
Expand the memory of the device with a
micro SD card (max. 32 GB)
Use the USB OTG port to connect the device
to your pc (for example for data transfer) or
any USB device (mouse, keyboard...).
Connect the device with the included to USB
power cable to your TV for charging.
Connect any USB device to this port
(mouse, keyboard...).
4
button and press OK.
©Velleman nv