Universal Remote Control F20 Manual De Usuario página 7

11
NOTE:
If the Component fails to turn off after you have entered all
the code numbers listed for your brand, you can scan through
all the other code numbers that are pre-loaded into the RF20
for that Component (in this case TV) by using the UP or
DOWN display buttons on the screen. (There is a chance that
your Component was actually manufactured by another
brand.) However, most of the code tables are so large that it
is usually faster to use the Learning Method on Page 15.
STEP 7:
Point the RF20 toward the Component you
want to program, (in this example, TV), and
punch in the 3-digit code that you wrote
down for that specific Component. Use the
Number buttons 0-9 on the remote to
punch in the code. If the 3-digit code
number that you just punched in is
correct, the Component will turn off. If the
STEP 7:
12