Maintenance And Repair - Pentair SOFTFLO 5600 Manual De Servicio

MAINTENANCE AND REPAIR

This unit is designed and constructed to treat the most difficult
of water. Various screens have been included in the system to
protect orifices.
BEFORE doing any service work, be sure all screens are clean
and will pass water. Periodic cleaning of the screens will
ensure long-term unit performance.
Lack of treated (soft) water is intermittent
Intermittent is often indicated by untreated water from
the heater (hot water) while the cold water tastes good.
Intermittent indicates excess water usage, a change in water
chemistry, or an improper frequency of regeneration. Review
entire application.
1. Bad timer — Replace
2. Bad timer motor — Replace
3. Fouled iron bed — Clean with resin cleaner
Lack of treated (soft) water is constant
1. Low salt setting — Adjust brine value
2. Water consumption increased — Check for household leaks
3. Too infrequent regenerations — Review sizing and reset timer
4. No salt in tank —Add salt to tank
5. Dirty screens — Clean screens
Brine tank overflow
1. Plugged screens or injector — Clean
2. Defective Brine Valve — Clean or replace
3. Defective timer or timer motor — Replace
PENTAIR SOFTFLO 5600 Service Manual • 29