Jacob Jensen Telephone 1 Manual Del Usuario página 12

UK
Congratulations on the purchase of your new JACOB JENSEN
Telephone.
The telephone is designed in Denmark by Jacob Jensen, whose
products have gained international recognition for their
original, simple and classic design. Jacob Jensen has received
about 100 prizes from around the world and has 19 products
included in The Design Study Collection and The Design
Collection of The Museum of Modern Art in New York.
The JACOB JENSEN Telephone 1 is suitable for connection
TM
to the public network. The telephone can either stand or
be mounted on the wall and is equipped with a memory for
11 numbers, mute function and high or low ringing tone
adjustment.
Installation
Table stand
The telephone is supplied with a table stand which you attach
as follows:
1. Slide the canals of the table stand into the tracks of the
base. The table stand is mounted when you hear a click.
2. Fit the modular contact of the coiled cord into the plug of
the handset.
3. Connect the telephone line to the wall outlet.
Wall mounting
The telephone can be mounted on the wall. Proceed as
follows:
1. Disconnect the coiled cord from the handset.
2. Push the button inside the square hole under the modular
jack using a pen or a finger, and pull the bracket away from
the base at the same time.
3. Pull the telephone line cord downwards through the groove
in order to let it out at the bottom and connect it to the
wall outlet.
. Reconnect the coiled cord.
12
5. Place the telephone on the screws already mounted on the
TM
wall (use the template, fig.  on page 25).
How .to .make .a .telephone .call
To lift off the handset, gently press on the upper part of the
handset with your index finger and the handset falls into your
hand.
a. Lift off the handset and wait for the dialling tone.
b. Dial the telephone number.
c. Put down the handset when the conversation is over.
Hook .switch
The telephone is equipped with a magnetic hook switch. To
get a new dial tone you can simply press the
Redial
If you wish to redial the last dialled telephone number, you
can use the key and this number is dialled automatically.
This number will be stored until the next time a telephone call
is made.
Note: Numbers larger than 31 digits cannot be stored.
One- .and .two-touch .numbers
The telephone has a memory for 11 numbers of max. 21
digits. To store numbers in the memory, proceed as follows:
One-touch number:
a. Lift off the handset or press
b. Press
c. Press
d. Enter the telephone number you wish to store.
e. Press
f. Hang up the handset or press
Two-touch numbers:
a. Lift off the handset or press
b. Press
c. Press
d. Press 0-9 to select a location.
e. Enter the telephone number you wish to store.
f. Press and hang up the handset or press
A pause can be inserted when storing numbers in the
memory e.g. when calling through a switchboard (PABX).
To insert a pause press the
Automatic .dialling
One-touch number:
Lift off the handset or press
and press .
Two-touch numbers:
key. Lift off the handset or press
press and the selected location 0-9.
Mute .function
When the MUTE button on the handset is pressed and held
down, the microphone is disconnected. When the button is
released, the microphone is activated again.
Ringing .melody .and .volume
The telephone has 3 ringing melodies and loudness levels.
To change melody and loudness level, proceed as follows:
a. Pick up the handset or press
b. Press
and
C. Select by using the numeric keys (please see fig. 3 page 13).
Note: The telephone is preset to combination no. 6.
R-key
The R-key is used for connecting a telephone call using a
switchboard (PABX) and at some special services offered by
the telephone company.
Cleaning
Clean the telephone by using a soft cloth. Do not use
aggressive chemicals, cleaning solvents or strong detergents.
.
key (e.g. 0 70226033).
, wait for the dialling tone
, wait for the dialling tone,