Functions; Tilt Measurement - Makita LD100P Manual De Instrucciones

D

Functions

GB
F
Addition / subtraction
I
Distance measuring.
E
The next measurement is added to the previous
NL
one.
P
The next measurement is subtracted from the
N
previous one.
FIN
This process can be repeated as required. The result
DK
is always shown in the summary line with the
S
previous value in the second line.
TR
The last step is cancelled.
CZ
Area
SK
Press once. The
PL
display.
SLO
Press this button to take the first length
HR
measurement (e.g. length).
H
Press it again to take the second length
GR
measurement (e.g. width).
RUS
The result is displayed in the summary line.
LV
button for longer to calculate the
Press the
EST
circumference.
LT
ROK
CN
Functions
symbol appears in the
Volume
Press this button twice. The
appears in the display.
Press this button to take the first length
measurement (e.g. length).
Press this button to take the second length
measurement (e.g. width).
Press this button to take the third length measure-
ment (e.g. height). The value is shown in the second line.
The volume then appears in the summary line.
button for longer to display additional
Press the
room information such as ceiling/floor area, surface
area of the walls, circumference.

Tilt measurement

)
The inclination sensor measures tilts between
± 45°.
)
During tilt measurement the instrument should
be hold without a transverse tilt (± 10°).
Press this button once to activate the tilt
sensor. The symbol appears in the display. The
tilt is continuously shown as ° or % depending on the
setting.
Press to measure the inclination and the
distance. See figure {J}.
10
symbol
Makita LD100P