Tips about the Charging Cradle
To adhere the charging cradle
1. Remove the fi lm attached to the back side of the charging
cradle.
2. Place the charging cradle on a dry, clean, and fl at surface. It
sticks immediately, without any need to apply pressure.
To remove the charging cradle
Pull up on one corner very gently and slowly. Be patient. If you pull
the whole cradle up at once, rather than lifting one corner fi rst,
you may damage the cradle or the surface it sits on.
Notes
• Do not remove the charging cradle by twisting it. The charging
pad might get damaged.
4
LG-W100