V. Operation Instructions on Remote Control
1. Power Button: Short press it to enter standby mode; short press it again to resume. If no
device is connected, the system goes to "-NO-".
2.
: Functions as "
3.
: Functions as "
4.
: Functions as "
5. Mode: Functions as "Mode" on the master device.
6. V+/V- Keys: In USB/TF/FM/AUX mode, press them to volume up/down.
7. Numeric Keys 0~9: In USB/TF card reading status, to play Track 12, just input numbers "1" and
"2", and in 2 seconds the system will go to Track 12 and start playback. Any input of number
larger than number of the total available tracks is invalid. In FM status, to listen to channel
107.5MHZ, just input "1075".
8. Environment Key: In USB/TF card reading status, short press it to toggle among Square,
Meeting, Home, Hall and Personal modes.
9. Sequencing Key: In USB/TF card reading status, short press it to toggle among four playback
sequencing modes (All - play all tracks in sequence; RAND - play in random; ONE - repeat one
track; FOL - repeat all tracks in a folder).
10.
:In USB/TF/FM/AUX mode, short press it to mute the device.
11. 100+: Number selection key - in MP3 mode (USB/TF card), short press it to add "100" to
current track number.
CAUTION:
Please Be sure to charge while music distorted.
" on the master device.
" on the master device.
" on the master device.
5
ENG