Led Indicators - Avigilon ENC-4P-H264 Guia De Instalacion

LED Indicators

Once the encoder is connected to the network, the connection status
LEDs will display the encoder's progress in connecting to the Network
Video Management software.
The following table describes what the LEDs indicate:
Table:LED Indicators
Connection
State
No Link Off
Obtaining IP One short
Address flash every
second
Connecting Two short
to NVR flashes every
second
Upgrading Two short
Firmware flashes and
one long flash
every second
Connected On
10
Connection
Status LED
Not physically connected to any
network device.
Attempting to obtain an IP address.
An IP address has been obtained and
is attempting to connect to the server
Updating the firmware.
Connected to the Network Video
Management software.
Description