Trunk Strap
The trunk strap (Fig. 26) offers additional restraint for children who experience involuntary, spontaneous movements,
which could otherwise make their position insecure. The trunk belt can be adjusted in height just like the headrest with
longitudinal straps attached to the upholstery.
Additional restraint can be provided by reducing the tension of the upholstery to create a larger space for the child.
Another possibility for providing greater trunk support is to use the headrest as a trunk guide. The headrest, with its
special shape and size is well suited for this use (Fig. 27).
Leg Straps
The leg straps (Fig. 28) restrain the legs and counteract extension movements, which can make the positioning and
care of the child more difficult.
The straps are also height adjustable, just like the headrest and trunk straps (Fig. 29).
If necessary, these straps can be also be used to support and guide the child's thighs.
All accessories, unless installed by the manufacturer, are to be installed by skilled personnel.
Practical Instructions on Safety, Maintenance and Care
• The maximal load capacity is 30 kg for size 1 and 60 kg for size 2.
• Robby is a therapeutic device and can only be used under supervision!
• Use only on a flat, even surface!
• During the installation, or when folding the bathing support, be careful not to pinch your fingers.
• The yoke for back height adjustment, the Ratchet-lock joint B (Fig. 4) and the end of the lower leg rest should al
ways be in contact with the tub.
• Although the position shown in Figure 30 is adjustable, spontaneous movements made by the child (e.g. due to
spasticity, cramping, athetoses) may result in a rocking movement of the bathing support, which can cause the child
to become unstable or even slip out of the bathing support if restraints aren't used.
• Clean all frame and net parts with mild household detergents only.
• After use the bathing support can be folded to save space (Fig. 19). When the support is folded the headrest should
be pointing downwards (Fig. 20). The rubber tube protectors provide protection against slipping and also release
any water through the drain holes.
• The mesh material allows for free water flow and can be removed for washing (max. 60° C).
• Prior to washing the device, it is advisable to close the straps and pack the upholstery fabric into a pillow case so
that it can be easily unfolded after being washed and prevent from mixing in with other items in the wash.
• If necessary, remove any stray material that accumulates in the hook and loop closures with a nail brush.
• I any damage to the upholstery occurs, replace it immediately.
• No other maintenance is necessary.
Warranty
The Otto Bock Warranty is valid only when the product is used according to the specified conditions and for its inten-
ded purposes, following all manufacturer's recommendations.
Technical Data
Measurements and weights
Overall length of the lying surface
Seat depth
Back length
Width
Weight
Max. load capacity
Size 1
115 cm – 133 cm
20 cm – 24 cm
63 cm – 72 cm
38 cm
3.8 kg
30 kg
Size 2
147 cm – 173 cm
31 cm – 43 cm
78 cm – 94 cm
38 cm
4.3 kg
60 kg
13