Audio Playback; Video Output - Velleman DVR4H2 Guía Rápida

• Refer to the full user manual on the included CD-ROM for more details.

Audio playback

• Press the SLOW and ZOOM button simultaneously to select the desired audio channel or use the
quick menu bar (see below). The current audio channel is indicated in the status bar.
Switch users
• The DVR can be accessed as administrator (
bar.
• To switch between users, click on the user icon (
• Press on the key lock icon (

Video output

• On both VGA and monitor outputs the video signal is present simultaneously.
• To switch to the other display, go to ADVANCED CONFIG and set the DISPLAY OUTPUT PATH.
Note: the DVR must be reset for the setting to take effect.
• It is also possible to select a display at start-up of the DVR. Press the left key (
panel during start-up to use the CRT monitor; press the right key (
VGA output.
8. Operation
Display
The following image shows the screen layout.
live audio channel 1 .. 4 enabled
audio channel disabled
digital zoom on (yellow) / off
LAN connected / Internet connected / no network connection
USB flash drive connected
key lock on
sequence mode
recording mode
administrator logged on
Note that actual screen icons might differ slightly from the ones shown above.
13/09/2011
DVR4H2 - DVR4L6
) or operator (
) than enter the password of the desired profile.
7
), icons are indicated in the status
or ) to lock the current session (
) during set-up to use the
A system date and time
B general system status
C available HDD capacity
D channel status
playback audio channel 1 .. 4 enabled
(yellow)
timer recording
USB mouse connected
Hard disk overwrite (default)
PTZ mode
motion mode
alarm mode
operator logged on
).
) on the front
©Velleman nv