Edesa FQ8E205A6 Manual De Instrucciones página 62

CHANGING THE DIRECTION OF DOOR OPENING
Remove the control panel casing by
1
inserting the point of a screwdriver
into the retaining grooves and
exerting leverage until the rim is
freed.
Remove the upper hinge after first
removing the retaining screw.
2
Grasp the upper door with both
hands and remove it from the
refrigerator.
Remove the middle hinge by
removing the protective plate
3
which hides the screws, and after
removing them, grasp the lower
door with both hands and remove
it from the refrigerator.
Remove the lower skirting as shown
in the diagram. Then remove the
4
left part of the skirting as shown to
locate the lower hinge as shown in
the diagram.
Remove the lower hinge by
removing the 3 retaining screws
(A). Remove the spindle (B) from
the right-hand side position and
insert it on the left hinge.
5
Insert the lower hinge on the left
after first removing the two
screws (C).
12