Specifications; Stihl Hsa 56 Hedge Trimmer; Cutting Blades; Stihl Ak Battery - Stihl HSA 56 Manual De Instrucciones

English

18 Specifications

18.1 STIHL HSA 56 Hedge Trimmer

– Approved battery: STIHL AK
– Weight without battery: 2.9 kg
For battery life see www.stihl.com/battery-life.

18.2 Cutting Blades

– Tooth spacing: 30 mm
– Cutting length: 450 mm
– Sharpening angle: 35°

18.3 STIHL AK Battery

– Battery technology: Lithium-ion
– Voltage: 36 V
– Capacity in Ah: see rating label
– Energy content in Wh: see rating label
– Weight in kg: see rating label
– Permissible temperature range for operation and storage:
-10°C to +50°C

18.4 Charger STIHL AL 101

– Rated voltage: see rating plate
– Frequency: see rating plate
– Rated power: see rating plate
– Charging current: see rating plate
– Permissible temperature range for use and storage:
+ 5 °C to + 40 °C
The charging times are indicated at
www.stihl.com/charging-times.
54

18.5 Extension Cords

If an extension cord is used, the cross sectional area of its
conductors must meet the following minimum requirements
– depending on the line voltage and length of the extension
cord:
220 V to 240 V
– Cord length up to 20 m: AWG 15 / 1.5 mm²
– Cord length 20 m up to 50 m: AWG 13 / 2.5 mm²
100 V to 127 V
– Cord length up to 10 m: AWG 14 / 2.0 mm²
– Cord length 10 m up to 30 m: AWG 12 / 3.5 mm²

18.6 Noise and Vibration Data

K-value for sound pressure level is 2 dB(A). K-value for
sound power level is 2 dB(A). K-value for vibration level is
2 m/s².
STIHL recommends that you wear hearing protection.
– Sound pressure level L
p
EN 60745-2-15: 80 dB(A)
– Sound power level L measured according to EN 60745-
wA
2-15: 91 dB(A)
– Vibration level a measured according to EN 60745-2-15
hv
– Control handle: < 2.7 m/s². K-value for vibration level is
2 m/s².
– Loop handle: < 1.2 m/s².
The vibration values quoted above have been measured
according to a standardized test procedure and may be used
to compare electric power tools. Depending on the type of
usage, the vibrations that actually occur may differ from the
values quoted. The vibration values quoted may be used for
an initial assessment of the user's exposure to vibrations.
The actual exposure to vibrations has to be estimated. This
process may also take into account times during which the
electric power tool is switched off and times during which it
is switched on but running off load.
18 Specifications
measured according to
0458-714-9821-C