ION Video 2 SD Guia De Inicio Rapido página 3

Setup
Items not listed under
1. Use standard composite video and stereo audio RCA cables to connect your
video source (VCR, camcorder, etc.) to the Video In and Audio In ports. Make
sure to match colors when making connections: yellow for composite video, red
(right) and white (left) for stereo audio.
2. Use either a standard HDMI cable or the included 1/8" (3.5 mm)-to-RCA audio-
video cable to connect the output of Video 2 SD to the inputs of your television
or monitor.
IMPORTANT: Do not use the HDMI Out and AV Out at the same time. If both are
connected, only the AV Out will work. To resume using HDMI, remove both the
HDMI and AV Out cables, then reattach only the HDMI cable.
3. Connect the mini-USB cable from the DC port to a charging adapter or to an
available USB port on your computer.
4. Once all connections have been properly made and the device is powered on,
you should see the image of your video source on your screen.
Introduction > Box Contents are sold separately.
3