Controls
When you touch a symbol, the respective function is activated.
Notes
The settings will remain unchanged if you touch several
■
symbols at once. This allows you to wipe up spills on the
control panel.
Always keep the controls dry. Moisture reduces their
■
effectiveness.
Before using for the first time
In this section, you can find out what you must do before using
your grill to prepare food for the first time. Read the Safety
information section beforehand.
Cleaning
Clean the grill and accessories thoroughly before first use
using lukewarm soapy water.
Grilling with water and lava stones
Fill the grill container with water before each use. The amount
of water depends on whether or not you wish to use lava
stones. The lava stones store the heat of the grill elements and
thus ensure intensive radiation of heat and even distribution of
heat.
Filling with water and lava stones
Remove the wire rack and fold up both grill elements.
1.
Remove the lava stone container from the appliance.
Ensure the drain valve is closed.
2.
Fill water into the grill container.
3.
Grilling with lava stones: 1 litre (bottom mark)
Grilling without lava stones: 3.5 litres (top mark)
To grill with lava stones: Remove the lava stones from the
4.
packaging and place them in the lava stone container. Insert
the lava stone container in the appliance.
Fold down the grill heating element, replace the wire rack.
5.
The grill is ready for operation.
16
Residual heat indicator
The grill has a two-stage residual heat indicator.
If an
appears in the display, the grill is still hot. As the grill
•
continues to cool down, the indicator switches to
indicator goes out when the grill has cooled down sufficiently.
Heating the grill
Heat the empty grill for a few minutes at the highest setting.
This will eliminate the new odour. A slight development of
smoke is normal when the grill is used for the first time.
. The
œ