Publicidad
Idiomas disponibles
Idiomas disponibles
With the Bohle DIAMANTOR band saw attachment you can transform almost any glass grinder into a fully functioning glass band saw in just a few steps.
The DIAMANTOR saw blade is diamond coated all around, allowing even complicated shapes or extremely small inner radii to be sawn. The self-centering
run makes guides for the saw blade unnecessary. No separate electrical or coolant supply is required.
Band saw attachment
with worktable
and saw blade
Preparation of the Grinder
1) Press the provided sleeve into the grid plate of the grinder. For the exact position for your particular grinder please refer to the attached drawings.
GLASTAR grinders do not require the sleeve. It is a good idea to permanently mark the corresponding grid opening with a waterproof marker.
2) Replace the diamond grinding head with the provided drive cone. By using the provided adjustment gauge, you will get the correct height (height from
grid plate to lower edge of drive cone 11 mm).
3) Press the water sponge into the grid plate. Then fill the water tray of the grinder with water. This will keep the saw blade constantly moistened. Any
splashguards must be removed.
1)
Preparation of the DIAMANTOR Band Saw Attachment
4) Set the worktable in place and fasten it with the 2 knurled screws.
5) On the underside of the saw attachment is a pin, 10 mm long. When mounting the band saw onto the grinder, make sure that the pin is inserted into the
sleeve.
With"KRISTALL" grinders the drive cone will be on the transparent blue side of the band saw.
With "GLASTAR", "GRYPHON" and "INLAND" grinders, the drive cone will be on the opposite (white) side.
6) Swivel the band saw attachment so that the drive roller touches the drive cone. Fasten the elastic band so that it stretches from the lateral pin to the grid
plate. This will create a constant pressure onto the drive cone.
The on/off switch of the grinder is used to turn on the band saw.
4)
Sleeve
Drive cone
2)
5)
Adjustment gauge
Fastening band
3)
6)
Coolant sponge
Hexagon key
Publicidad
