Hitachi L47V651 Guia De Funcionamiento página 7

How to set up your new HITACHI
SETTING FOR WALL MOUNTING
STEP (1) :
Please locate the STAND METAL SUPPORTS on the back of the TV . These metals is use to hold the TV and the Base ;
so it needs to remove 4 screws from the STAND METAL in order to separate the TV from the Base.
2 STAND METAL
SUPPORTS
STEP (2):
Now please remove the 5 screws of the STAND metal from the TV, now the TV STAND can be separated from the
TV. For dimensions of the WALL MOUNT assembly please refer to page 66.
5 SCREWS
For Model L47V651 & L42V651
CAUTION- This LCD Flat Panel for use only with Hitachi WM07S Wall Mount. Use with other
Wall Mount is capable of resulting in instability causing possible injury.
NOTE:
Use the specified WALL MOUNT unit for the LCD TV depending on the size of your TV.
Please access our web site at: www.hitachi.us/tv (US) or www.hitachi.ca/tv (CAN) for
recommended accessories for your TV.
STAND METAL
LCD
Television
Remove 4 screws
then remove the 2 metal
supports.
TV STAND BASE
7