Important Safety Instructions; Unpacking The System - JBL CONTROL 2.4G Manual Del Usuario

IMPORTANT SAFETY
INSTRUCTIONS
Please read the following precautions
before use:
1. Read these instructions.
2. Keep these instructions.
3. Heed all warnings.
4. Follow all instructions.
5. Do not use this apparatus near water.
6. Clean only with a dry cloth.
7. Do not block any ventilation openings. Install in accordance with
the manufacturer's instructions.
8. Do not install near any heat sources such as radiators, heat
registers, stoves or other apparatus (including amplifiers) that
produce heat.
9. Do not defeat the safety purpose of the polarized or grounding-type
plug. A polarized plug has two blades with one wider than the other.
A grounding-type plug has two blades and a third grounding prong.
The wide blade or the third prong is provided for your safety. If the
provided plug does not fit into your outlet, consult an electrician for
replacement of the obsolete outlet.
10. Protect the power cord from being walked on or pinched,
particularly at plugs, convenience receptacles and the point where
they exit from the apparatus.
11. Only use attachments/accessories specified by the manufacturer.
12. Use only with the cart, stand, tripod, bracket or
table specified by the manufacturer or sold with the
apparatus. When a cart is used, use caution when
moving the cart/apparatus combination to avoid
injury from tip-over.
13. Unplug this apparatus during lightning storms or when unused for
long periods of time.
14. Refer all servicing to qualified service personnel. Servicing is
required when the apparatus has been damaged in any way, such
as power supply cord or plug is damaged, liquid has been spilled
or objects have fallen into the apparatus, the apparatus has been
exposed to rain or moisture, does not operate normally, or has been
dropped.
15. Do not expose this apparatus to dripping or splashing and ensure
that no objects filled with liquids, such as vases, are placed on the
apparatus.
16. To completely disconnect this apparatus from the AC Mains,
disconnect the power supply cord plug from the AC receptacle.
17. The mains plug of the power supply cord shall remain readily
operable.
18. Do not expose batteries to excessive heat such as sunshine, fire
or the like.
The lightning flash with arrowhead symbol, within an
equilateral triangle, is intended to alert the user to the
presence of uninsulated "dangerous voltage" within the
product's enclosure that may be of sufficient magnitude
to constitute a risk of electric shock to persons.
The exclamation point within an equilateral triangle is
intended to alert the user to the presence of important
operating and maintenance (servicing) instructions in
the literature accompanying the product.
WARNING: To reduce the risk of fire or electric shock, do not expose
this apparatus to rain or moisture.
4
FEDERAL COMMUNICATIONS
COMMISSION INTERFERENCE
STATEMENT
This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against
harmful interference in a residential installation.
This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance
with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference
will not occur in a particular installation. If this equipment does
cause harmful interference to radio or television reception, which
can be determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one of the
following measures:
to which the receiver is connected.
FCC Caution: To assure continued compliance, any changes or
modifications not expressly approved by the party responsible for
compliance could void the user's authority to operate this equipment.
FCC Radiation Exposure Statement
This equipment complies with FCC RF radiation exposure limits set
forth for an uncontrolled environment. This equipment should be
installed and operated with a minimum distance of 20 centimeters
between the radiator and your body.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following
two conditions:
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received, including interference that may
cause undesired operation.
IC Statement and Warning
This Class B digital apparatus complies with Canadian ICES-003. Cet
appareil numérique de la classe B est conforme à la norme NMB-003
du CanadaIC Statement and Warning.
THANK YOU FOR CHOOSING JBL
For more than 60 years, JBL has been involved in every aspect of
music and film recording and reproduction, from live performances
to the recordings you play in your home, car or office.
We're confident that the JBL system you have chosen will provide
every note of enjoyment that you expected – and that when you think
about purchasing additional audio equipment for your home, car or
office, you will once again choose JBL.
Please take a moment to register your product on our Web site at
www.jbl.com. It enables us to keep you posted on our latest advance-
ments, and helps us to better understand our customers and build
products that meet their needs and expectations.
The JBL On Air Control 2.4G is an advanced wireless loudspeaker
® ®
system that allows you to enjoy your favorite music in remote
locations around your home, or to add surround speakers to your
home theater system without running wires to the back of the room.
To ensure trouble-free performance, please carefully read these
instructions completely before connecting or using the system.

UNPACKING THE SYSTEM

ID
CODE
Carefully unpack the system. If you suspect damage from transit,
INPUT
report it immediately to your dealer and/or delivery service. 1 2 3 4
R L
Keep the shipping carton and packing materials for future use.
Open the package and verify the following contents:
Included
1 x Transmitter module
1 x Universal power supply for transmitter
1 x Wall-mount bracket for transmitter with 2 x panhead
– +
M3 x 4 machine screws for attaching wall-mount bracket
ID
to transmitter
CODE
4 x Small round self-adhesive feet – to be attached on
transmitter left side panel if transmitter to be used vertically
1 2 3 4
TO RIGHT SPEAKER
1 x Active speaker/receiver (left-channel speaker)
1 x Universal power supply for active speaker/receiver
power supply DC 20V
SUB-OUT LINE-IN
power supply
LEFT-CHANNEL SPEAKER
1 x Wall-mount holder for active speaker/receiver universal
power supply
1 x Passive speaker (right-channel speaker)
2 x Wall-mount rotatable brackets for active and passive speakers
(includes bar wrench and backup cords)
1 x IR Remote Control
1 x Interconnect cable (1m/3.3 ft. RCA – RCA)
1 x Interconnect cable (1m/3.3 ft. RCA – 1/8-inch mini plug)
10m/33 ft. x Speaker wire
1 x Owner's manual (multilanguage)
1 x USA warranty sheet
MUTE INPUT
VOL
Remote Control
– +
ID
CODE
1 2 3 4
TO RIGHT SPEAKER
DC 20V SUB-OUT LINE-IN
Left/Active Speaker
LEFT-CHANNEL SPEAKER
(Rear)
– +
TO LEFT SPEAKER
Right/Passive
RIGHT-CHANNEL SPEAKER
Speaker
Wireless Transmitter
ID
CODE
INPUT
1 2 3 4
R L
5
T
RIGHT-C