Zooming-in
1. Complete Steps 1 to 3 of "Using the WISELINK Menu". (Refer to page 65)
2. Press the ◄ or ► button to move to "Photo", then press the ENTER button.
The saved file information is displayed as a folder or file.
3. Press the ▲, ▼, ◄ and ► buttons to select a file, then press the ENTER button.
Pressing the button over a photo thumbnail displays the photo in full screen.
4. P ress the INFO button to display the option (Start Slide Show, Rotate, Zoom, List).
Press the ▲ or ▼ button to select "Zoom", then press the ENTER button.
Press the ▲ or ▼ button to select the required option (X1, X2, X4), then press the
ENTER button.
• Zoom(x 1): Restore the photo to its original size.
• Zoom(x 2): Zoom-in to the photo x2.
• Zoom(x 4): Zoom-in to the photo x4.
To pan up/down/left/right in the zoomed-in photo, press the INFO button to exit
option menu, then press the ▲, ▼, ◄ and ► buttons.
Images with a resolution larger than 1280 X 720 are not supported.
The Rotate/Slide show option is disabled when the Zoom option is selected.
To exit WISELINK mode, press the WISELINK button on the remote control.
English - 71
XTICK
861MB/994MB Free
Move
Enter
Up Folder
Forder1
Photo 0001
File 4
File 5
File 6
File 9
File 10
File 11
Select
Option
Move
INFO
Start Slide Show
x1
Rotate : 0°
x2
Zoom : x1
x4
List
Exit
INFO
x 1
x 1
Start Slide Show
Slide Show
Rotate : 0°
Rotate : 0°
Zoom : x1
Zoom : x1
List
List
Exit
INFO
Exit
INFO
Return
Photo 0001
None
File 7
File 8
File 12
File 13
View
Return