TECshow Alfie XL Manual De Usuario página 3

2. Setup
2.1 Mounting
The Moving Head is fully operational in any mounting posi-
tion, hanging upside-down, side mounted, or set on a flat
llevel surface, etc.
IMPORTANT!!! Safety cables must always be used when
unit is celling or truss mounted. The safety cable must be
capable of holding 10 times the weight of the fixture.
2.3 AC Power
All units must be powered directly from a switched circuit.
This unit cannot be run on a rheostat or dimmer circuit even
if used solely for a 0% to 100% switching.
WARNING!!! ALL FIXTURES MUST BE CONNECTED
TO CIRCUITS WITH A SUITABLE EARTH GROUND.
ALFIE XL
ENGLISH VERSION
p. 3