Manually Adding Channels; Using The On-Screen Menu System - Insignia NS-DXA1 Guia Del Usuario

Insignia NS-DXA1 Coupon Eligible Converter Box

Manually adding channels

If you need to add a channel that was not found
during the channel search, you can add the
channel manually.
To manually add channels:
1 Press MENU. The SETUP menu opens.
2 Press or to select Manual Tuning, then
. The Channel Edit menu opens.
press or
3 Select the channel you want to add, then
press .
4 Repeat Step 3 to add more channels.

Using the on-screen menu system

The first time you turn on your converter box, the
Install Guide opens, where you can set basic
options. For more information, see "Setting basic
options" on page 4.
Your converter box has an on-screen menu
system that you can use to adjust options such
as picture and sound.
To use the on-screen menu system:
1 Press MENU. The menu system opens.
2 Press to select a menu, then press
or
or to go to the options for the menu you
selected.
3 Press to select an option, then press
or
to go to the next level of options.
4 Press to adjust the option, then press
or
to confirm your setting.
5 Press EXIT to close the menu system.
SETUP menu
Menu option
Auto Tuning
EZ Add
Channel Edit
Manual Tuning
Output Channel
OPTION menu
Menu option
Clock
TV Aspect Ratio Selects your TV type. Select 4:3 if your TV has a
www.insignia-products.com
Description
Automatically finds all digital channels available
through the From Antenna jack. For more
information, see "Searching for channels" on
page 6.
Automatically adds new channels available
through the From Antenna jack. Select this
option, then press . Your converter box
searches for new channels and adds them to the
memorized channel list.
Manually adds or deletes channels from the
channel list or the Favorites list. For more
information, see "Editing the memorized channel
list" on page 6 or "Creating a Favorites list" on
page 6.
Manually adds. For more information, see
"Editing the memorized channel list" on page 6.
Selects the channel (3 or 4) for the signal from
the To TV (RF) jack. Your TV must be tuned to the
same channel to display the TV image. For more
information, see "Setting the output channel" on
page 5.
Description
Sets the time. Normally, the clock is set using
signals transmitted by digital TV (DTV) stations.
When you select a time zone, the clock is set
automatically.
Note: If the DTV station does not send a time
signal or sends the wrong time signal, the clock
may be set to an incorrect time.
For more information, see "Controlling closed
captions" on page 10.
standard screen. Select 16:9 if your TV has a
wide screen. For more information, see
"Selecting the TV type" on page 8.
7