Polygroup SUMMER WAVES SKIMMERPLUS SFX600 Manual Del Usuario

Polygroup SUMMER WAVES SKIMMERPLUS SFX600 Manual Del Usuario

Ocultar thumbs Ver también para SUMMER WAVES SKIMMERPLUS SFX600:

Publicidad

Idiomas disponibles

Idiomas disponibles

Enlaces rápidos

SUMMER WAVES
SKIMMERPLUS
READ AND KEEP THESE INSTRUCTIONS FOR FUTURE REFERENCE
For answers to common questions, setup videos and troubleshooting tips, please
visit support.polygroupstore.com or call Customer Service: (888) 919-0070
DO NOT RETURN PRODUCT TO STORE
Should you encounter a problem with your Polygroup
to Polygroup
. Prior to contacting Customer Service, please first review the Troubleshooting Guide in the Installation Manual, or review the FAQ and instructional
®
videos at support.polygroupstore.com. If you are still unable to correct the problem, please contact Polygroup
product type, model number and your purchase receipt ready, so that our Customer Service Representative can assist you in resolving the problem. You may be asked
to return all or part of the product for inspection and/or repair. Do not return any product to Polygroup
Polygroup
Trading Limited, (hereinafter "Polygroup
®
workmanship for 180 days from the date of purchase. Original Purchaser must retain proof of such purchase in the form of an original store sales receipt and must
produce such upon request by Polygroup
applies only to the original purchaser of the product and is limited solely to the repair or replacement of the product, to be decided in Polygroup
Consequential damages, including claims for loss of water, pool chemicals, damage, or labor are not covered under this Limited Warranty. This Warranty will be
declared invalid should the Purchaser modify or repair the product themselves or by unauthorized persons; use non-Polygroup
use the product in contravention of the manufacturer's Instructions; use improper voltage; abuse the product in any way; or through accident or negligence. Normal
wear-and-tear is not covered under this Warranty, nor are acts of God outside the control of Polygroup
grow through the ground cloth and/or pool liner, as this is not a manufacturing defect.
IN NO EVENT SHALL Polygroup
PARTY FOR DIRECT OR CONSEQUENTIAL DAMAGES. Some states or countries, or other jurisdictions, do not allow the exclusion or limitation of incidental or
consequential damages, so the above limitation or exclusion may not apply to you.
FOR ABOVE GROUND SWIMMING POOLS
SFX600 / SFX1000 / SFX1500 models
Product, please do not return the product to the place of purchase. All Warranty claims must be made directly
®
LIMITED WARRANTY
") warrants to the original purchaser only, the SFX type Electric Filter Pump against defects in material and
®
or its designated agents. Warranty claims cannot be processed without a valid proof of purchase. This Limited Warranty
®
, THEIR AUTHORIZED AGENTS, RELATED ENTITIES, OR EMPLOYEES BE LIABLE TO THE BUYER OR ANY OTHER
®
DISTRIBUTED BY: Polygroup
Unit 606, 6th Floor, Fairmont House, No.8 Cotton Tree Drive, Central, Hong Kong
OWNER'S MANUAL
FILTER PUMP
®
please visit www.polygroupstore.com
customer service at (888) 919-0070. Please have the
®
without a Return Merchandise Authorization number.
®
. Polygroup
will not be held responsible for grasses that may
®
®
Trading Limited
®
®
To order parts and accessories,
's sole discretion.
®
parts or accessories with the product;
®
Manual#
09C3A4USA015

Publicidad

Capítulos

Tabla de contenido
loading

Resumen de contenidos para Polygroup SUMMER WAVES SKIMMERPLUS SFX600

  • Página 1 Warranty claims cannot be processed without a valid proof of purchase. This Limited Warranty ® applies only to the original purchaser of the product and is limited solely to the repair or replacement of the product, to be decided in Polygroup ’s sole discretion.
  • Página 2: Tabla De Contenido

    TABLE OF CONTENTS Warnings 3 ~6 Preliminary Steps, Important Notes & Pump Power Info Parts List 7 ~ 8 Setup Instructions, Use of Pump 9 ~ 10 Motor Care, Pump Maintenance Filter Cartridge Use & Care Pool Water Care Pump Disassembly & Storage 12 ~ 13 Pump Servicing Instructions 13 ~ 16...
  • Página 3: Warnings

    CUSTOMERS THAT PURCHASE POOLS MAY BE REQUIRED BY LOCAL OR STATE LAW TO INCUR ADDITIONAL EXPENSES WHEN INSTALLING A POOL, IN ORDER TO COMPLY WITH STATE OR LOCAL LAWS REGARDING FENCING AND OTHER SAFETY REQUIREMENTS. CUSTOMERS SHOULD CONTACT THEIR LOCAL BUILDING CODE ENFORCEMENT OFFICE FOR FURTHER DETAILS. POLYGROUP IS NOT RESPONSIBLE FOR ANY ADDITIONAL EXPENSES THAT YOU MAY INCUR.
  • Página 4 Turn on the pump for the recommended hours daily. If you are unsure of the time frames please refer to support.polygroupstore.com for the recommended Pump Operation Hours based on pool types and sizes. Clean and replace filter cartridge frequently. Replace only with genuine Polygroup / Summer Waves Brand filter cartridge.
  • Página 5: First Aid

    OWNER’S MANUAL First Aid 1. Keep a working phone and a list of emergency numbers near the pool. 2. Become certified in cardiopulmonary resuscitation (CPR). In the event of an emergency, immediate use of CPR can make a lifesaving difference. Special Warning 1.
  • Página 6: Installer Responsibilities

    ASME American Society of Mechanical Engineers Two Park Avenue, New York NY 10016-5990 Contact: 800-843-2763 (U.S. & Canada) 973-882-1170 (outside North America) www.asme.org NSPI National Spa and Pool Institute (see APSP) UL Underwriters Laboratories 333 Pfingsten Road,Northbrook IL 60062-2096 Contact: 877-854-3577 or 847-272-8800 www.ul.com NSF NSF International P.O.
  • Página 7: Preliminary Steps, Important Notes & Pump Power Info

    2. All electrical components shall be installed in accordance with Article 680 of the 2017 National Electrical Code (NEC ) or its latest approved edition. ® ® 3. The maximum capacity of 1” diameter chlorine tablets of Polygroup ’s patented Filter Cartridge (U.S. Pat. 7,005,062): ® a. Type D cartridges: 2 b.
  • Página 8 Outside Pool Wall Inside Pool Wall Should you encounter any problems, contact Customer Service at (888) 919-0070 from 8AM to 5PM MST, Monday-Friday. Extended operating days and hours during peak season requirements.
  • Página 9: Setup Instructions, Use Of Pump 9

    OWNER’S MANUAL SETUP INSTRUCTIONS Before assembly, take a few minutes to identify and become familiar with all the parts. WARNING: CLIMBING HAZARD! PLEASE PREVENT CHILDREN FROM CLIMBING ON THE FILTER CANISTER TO GAIN ACCESS TO THE POOL. Skimmer Installation 2. Slide open the Top Cover and take out the parts inside.
  • Página 10: Pump Installation

    Pump Installation 8. Slide close the Top Cover onto the Skimmer Canister 7. From inside the Skimmer Canister , snap the pins of the Weir into the pivot slots, one after another. The Weir should now stand upright but not stuck. Push-in Inside Pool Wall Weir installation...
  • Página 11: Motor Care, Pump Maintenance

    (see POOL WATER CARE, p. 12). 5. Dispose of any used filter media in accordance with applicable regulations/legislation. 6. Always use genuine Polygroup Summer Waves Filter Cartridges; they are available at ®...
  • Página 12: Pool Water Care

    Leaf Net with handle – for removing leaves, trash, insects, etc. from the pool g. Chlorine Dispenser (inside Polygroup ’s patented Filter Cartridge U.S. Pat. 7,005,062) - for dispensing 1" chlorine tablets ONLY. See p. 7 FILTER PUMP ®...
  • Página 13: Pump Servicing Instructions 13

    OWNER’S MANUAL the parts, and liberally lubricate the Skimmer Gasket Rubber Seal with petroleum jelly. Then reassemble them back onto the Skimmer Canister b. Remove the Motor Assembly by turning open the Motor Seal Nut . Clean and dry completely the Pump. Then see STEP 3: Pump Reassembly/Replacement (p.
  • Página 14 5. Slowly take out the Motor Assembly . Be careful not to lose the Rubber Nozzle or Canister Gasket You may need to reach inside the Canister to free the Pump Motor. STEP 2: Rotor Inspection/Replacement The Pump is consisted of a Rotor Assembly and its related parts.
  • Página 15 OWNER’S MANUAL STEP 3: Pump Reassembly/Replacement 1. Lubricate the Canister Gasket , then insert it back into the groove (inner IMPORTANT: make sure that the cord of the groove for SFX600/SFX1000) at the bottom of the Skimmer Canister Motor Assembly is placed through the Motor Seal Nut BEFORE replacing the Pump.
  • Página 16 OWNER’S MANUAL 3. Once the Motor is correctly aligned, match the threads of the Motor Seal to that of the Canister, and tighten by twisting the Nut counterclockwise. IMPORTANT: make sure the Nut and Canister are not cross-threaded; otherwise leaks may occur. Should you encounter any problems, contact Customer Service at (888) 919-0070 from 8AM to 5PM MST, Monday-Friday.
  • Página 17: Troubleshooting Guide

    OWNER’S MANUAL TROUBLESHOOTING GUIDE WARNING: UNPLUG THE POWER CORD BEFORE TROUBLESHOOTING THE FILTER PUMP. Problem Cause Solution A Plug the GFCI Power Cord Set to a grounded power outlet. Then press the A Pump not plugged in RESET button to start the Pump. 1.
  • Página 18: Replacement Parts Ordering Info

    OWNER’S MANUAL REPLACEMENT PARTS ORDERING INFO SFX600 SFX1000 SFX1500 Description Part # P58PP1954W05 P58PP1954W05 P58PP1954W05 Motor Seal Nut P58PP1954G8U P58PP1954G8U P58PP1954G8U Rubber Nozzle P58182601K01 P58182601K01 P58185201K01 Pump Motor Assembly P58X0601C000 P58X1001C000 P58X1500C000 Canister Gasket / Motor Seal P58147800K01 P58147800K01 P58164800K01 P58PP1950W05 P58PP1950W05 P58PP1950W05...
  • Página 19: Bomba Summer Waves Con Filtro Skimmerplus

    Las reclama ciones de garantía no pueden procesarse sin un justificante de compra ® válido. Esta garantía limitada solo se aplica al comprador original del producto y se limita a la reparación o sustitución del producto, a discreción de Polygroup . Los ®...
  • Página 20 ÍNDICE Advertencias 3 ~ 6 Pasos Preliminares Y Notas Importantes Acerca De La Bomba De Filtración Y Potencia De La Bomba Lista De Piezas 7 ~ 8 Instrucciones De Montaje Y Uso De La Bomba 9 ~ 10 Cuidado Del Motor De La Bomba Y Mantenimiento De La Piscina Uso Y Cuidado Del Cartucho De Filtro Cuidado Del Agua De La Piscina Desmontaje Y Almacenamiento De La Bomba De La Piscina...
  • Página 21: Advertencias

    ADICIONALES AL INSTALAR UNA PISCINA, EN CUMPLIMIENTO DE LAS LEYES ESTATALES O LOCALES RELATIVAS AL VALLADO Y OTROS REQUISITOS DE SEGURIDAD. LOS CLIENTES DEBEN PONERSE EN CONTACTO CON LAS AUTORIDADES LOCALES CORRESPONDIENTES PARA MÁS INFORMACIÓN. POLYGROUP NO ES RESPONSABLE POR GASTOS ADDICIONALES QUE PUEDAN OCCURIR.
  • Página 22: Sistemas De Circulación

    Limpie y cambie el cartucho de la bomba del filtro con frecuencia. Reemplazar solo con un cartucho de filtro original de la marca Polygroup...
  • Página 23 MANUAL DEL USUARIO 3. Coloque los muebles (por ejemplo, mesas o sillas) lejos de la piscina para que los niños no puedan subirse a ellos para acceder a la piscina. Riesgo de electrocución 1. Mantenga los cables eléctricos, radios, altavoces y otros aparatos eléctricos legos de la piscina. 2.
  • Página 24: Sistemas De Filtración

    APSP Association of Pool & Spa Professionals (formerly National Spa and Pool Institute) 2111 Eisenhower Avenue, Suite 500 Alexandria VA 22314-4679 Contacto: 703-838-0083 www.apsp.org ASME American Society of Mechanical Engineers Two Park Avenue, New York NY 10016-5990 Contacto: 800-843-2763 (U.S. & Canada) 973-882-1170 (outside North America) www.asme.org NSPI National Spa and Pool Institute (see APSP) UL Underwriters Laboratories...
  • Página 25: Pasos Preliminares Y Notas Importantes Acerca De La Bomba De Filtración Y Potencia De La Bomba

    4. Los sistemas de bomba de filtración de la serie SFX son fabricados por Polygroup con el número de control de ETL 4000608 y 4006317, con doble aislamiento y ®...
  • Página 26 Parte Fuera de La Piscina Parte Interior de La Piscina Si tuviera algún problema, llame al Servicio al cliente al número (888) 919-0070 de 8:00 a 17:00 (MST) Lun, Jue, Vie. Días y horas ampliables durante la temporada alta.
  • Página 27: Instalación Del Skimmer (Rebosador)

    MANUAL DEL USUARIO INSTRUCCIONES DE MONTAJE Antes de montar el producto, dedique unos minutos a comprobar el contenido y familiarícese con todas las piezas. ADVERTENCIA: COLOQUE ESTE PRODUCTO APARTADO DE LA PISCINA A FIN DE EVITAR QUE LOS NIÑOS SE SUBAN A ÉL Y ACCEDAN A LA PISCINA. Instalación del skimmer (rebosador) 2.
  • Página 28: Uso De La Bomba

    Instalación de la bomba 8. Deslice y cierre la Cubierta superior sobre la Caja del skimmer 7. Desde dentro de la caja del skimmer , enganche los pines de la Compuerta en las ranuras de los pivotes, uno después de otro. La Compuerta ahora debe estar de pie, pero no atascada.
  • Página 29: Cuidado Del Motor De La Bomba Y Mantenimiento De La Piscina

    (ver CUIDADO DEL AGUA DE LA PISCINA, p. 12). 5. Elimine cualquier filtro usado en conformidad con las regulaciones/leyes correspondientes. 6. Siempre use Cartuchos de filtro Polygroup Summer Waves ; se encuentran disponibles ®...
  • Página 30: Cuidado Del Agua De La Piscina

    Net para hojas con asa - para eliminar hojas, basura, insectos, etc. de la piscina g. Dispensador de cloro (dentro del Cartucho de filtro patentado de Polygroup (Patente de EE. UU. 7,005,062) - para dispensar SOLAMENTE pastillas de cloro ®...
  • Página 31: Instrucciones De Mantenimiento De La Bomba 13

    MANUAL DEL USUARIO 3. Desmonte la Bomba: a. Deslice y abra la Cubierta superior , retire el Cesto del colador , el Cartucho de filtro y cualquier pastilla de cloro que haya quedado dentro, y desenganche la Compuerta . Limpie y seque todas las partes, y lubrique el Sello de goma del empaque del skimmer abundantemente con vaselina.
  • Página 32: Paso 2: Inspección/Reemplazo Del Rotor

    5. Saque lentamente el ensamblaje del motor . Tenga cuidado de no perder la Boquilla de goma o el Empaque de la caja Podría tener que alcanzar dentro de la caja para liberar el motor de la bomba. PASO 2: Inspección/Reemplazo del rotor La Bomba consiste de un Ensamblaje del rotor y sus partes relacionadas.
  • Página 33 MANUAL DEL USUARIO PASO 3: Reemplazo/Reensamblaje de la Bomba 1. Lubrique el Empaque de la caja , luego insértelo de regreso en la IMPORTANTE: asegúrese que el cable del ranura (ranura interna para SFX600/SFX1000) en la parte inferior de la Conjunto del motor esté...
  • Página 34 3. Una vez que el motor esté correctamente alineado, aparee las roscas de la Tuerca del sello del motor a las de la Caja y luego ajuste la Tuerca hacia la izquierda. IMPORTANTE: asegúrese que la Tuerca y la Caja no tengan las roscas cruzadas;...
  • Página 35: Guía De Resolución De Problemas

    MANUAL DEL USUARIO GUÍA DE RESOLUCIÓN DE PROBLEMAS ADVERTENCIA: DESENCHUFE EL CABLE DE ALIMENTACIÓN ANTES DE SOLUCIONAR CUALQUIER PROBLEMA EN LA BOMBA DE FILTRACIÓN. Problema Causa Solución A Enchufe el set de cable de alimentación GFCI a un tomacorriente correctamente A La Bomba no está...
  • Página 36: Información Sobre El Pedido De Piezas De Repuesto

    MANUAL DEL USUARIO INFORMACIÓN SOBRE EL PEDIDO DE PIEZAS DE REPUESTO SFX600 SFX1000 SFX1500 Llave Descripción N.º De Pieza P58PP1954W05 P58PP1954W05 P58PP1954W05 Tuerca de sellado del motor P58PP1954G8U P58PP1954G8U P58PP1954G8U Boquilla P58182601K01 P58182601K01 P58185201K01 Conjunto del motor P58X0601C000 P58X1001C000 P58X1500C000 Junta del cartucho P58147800K01 P58147800K01...

Tabla de contenido