Descargar Imprimir esta página

Hayward SharkVAC XL Pilot Manual Del Usuario página 32

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 38
The bottom only mode can be used when you want to only clean the bottom of your pool or when you
are using a pool cover. Its primary feature is to clean the pool faster by only cleaning the pool bottom
when the walls do not need cleaning. The bottom only mode is very useful when the pool is equipped
with a hard cover by staying on the bottom the cleaner avoids hitting or damaging the cleaner or the
cover when it is closed. During the season and for regular cleaning, the bottom only mode is faster and
more energy efficient
• Avoid dropping or throwing machine into pool. Place cleaner away from the pool wall but do not throw
the cleaner in the pool.
• Cleaning the filter cartridge after every use maximizes the unit's performance.
• Replace worn brushes and foam rollers.
• To avoid clogging the cleaner's filter elements, be sure all chemical powders are fully dissolved before
operating the cleaner.
• In a pool with high calcium content, more frequent cleaning of the filter is recommended.
• Save the original carton for extended storage or shipping requirements should your cleaner require
dealer service.
• The sealed Motor Unit and the Power Supply contain no user-serviceable parts. Opening them
will automatically VOID your warranty.
• Remove items such as thermometer, toys and the like from the pool before operating the unit. Such
items can jam the cleaner and cause damage to the unit and/or your pool.
• The filter bucket is designed to be cleaned with the filters installed for normal clean up. For deep
cleaning, the user can remove each filter cartridge and clean separately.
• During the normal operating cycle of the cleaner, the handle side of the unit will rise from the pool
bottom to allow the unit to clear obstacles, such as elevated main drains and stair steps.
• For cleaners used in areas that have a lot of sand the cleaner may need to be rinsed with water at all
flapper (filter bucket's flapper is at intake port) areas, and may need rinsing at the dome push button
to allow free operation.
Hayward only guarantees the quality, performance and safety of its products when assembled with genuine Hayward manufactured parts.
Page 13 of 18
BOTTOM ONLY CLEANING FEATURE
IMPORTANT TIPS
Use of non genuine Hayward manufactured parts will void all warranty.
SharkVAC XL™ Pilot Robotic cleaner
Rev. C

Publicidad

loading