Selecting Tracks; Interrupting Playback - Blaupunkt BREMEN SQR 46 DAB Manual De Instrucciones

Tabla de contenido

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 250
MP3/WMA/iPod mode
Removing a USB data carrier
S w i t c h e d o the car sound system so that the data carrier will be
correctly unregistered.
Disconnect the USB data carrier.
BEDIENUNGSANLEITUNG: BREMEN SQR 46 DAB
After you pulled o
the data carrier from the USB port at the front
of the device, close the protective cap of the USB port : .
Inserting/removing the memory card
Open the USB cover.
Insert the memory card with its labelled side up and its contacts rst ito
the cars slot untile tit clicks into place.
After switch-on, the device automatically selects the inserted me-
mory card as audio source. The data of the memory card are being
read. Afterwards, the playback starts inMP3 mode.
Notes:
• If the inserted memory card cannot be played,"SD ERROR" is
brie y displayed.
• The time required for reading the card depends on the design
and size of the memory card.
Removing the memory card
Push on the memory card until it disengages.
Pull the memory card out of the card slot

Selecting tracks

Press the button
/
Fast searching with long press
Press the button △/▽ to change folder during playback.
Notes:
• Press the button 1
• Turn the rotary volume button to select your desired track.
11
42
BR460
BR460
or < / > to change to the previous /next track.
/
or < / > button.
and the display will show track name.
AUTORADIO
• If the current track plays longer than 3 seconds and press
1
then you turn rotary control one notch counter-clockwise
or clockwise, the tracks starts playing again.
Selecting a folder (in MP3/WMA mode only)
Press the button 1
and long press the rotary control back to
USB boot folder.
Turn the rotary volume button to select your desired folder.
Notes:
• If you turn rotary control notches counter-clockwise or
clockwise, you jump forward or reverse by the corresponding
Bedienungsanleitung
number of folders.

Interrupting playback

Operating instructions
Press the button
to interrupt the playback ("PAUSE") or to con-
tinue it.
Mode d' emploi
Scanning all tracks (not in iPod mode)
Istruzionl of uso
The scan function scans all available tracks.
Press the rotary control for approx. 2 seconds to start the scan,or brieftly
to continueplaying the currently scanned track. During the scanning ,
Gebruiksaanwijizing
"SCAN" and the le name are intermittently shown on the display.
Note:
Bruksanvisining
The scan time can be adjusted (see the chapter "User settings", section
"Making settings in the "VARIOUS" menu", menu item "SCAN TIME").
11
22.05.19 17:00
22.05.19 17:00

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

2001018000000

Tabla de contenido