Dometic GROUP WAECO SinePower MSI912 Instrucciones De Montaje página 49

SinePower
!
WARNING! Danger of electrocution!
If you wish to connect more than one appliance to the inverter and
install a socket distribution circuit, you must arrange a circuit
breaker (residual current circuit breaker) and set a grounding
bridge in the inverter.
➤ Install a residual current circuit breaker in the socket distribution circuit.
9.6 Setting the earthing bridge (fig. 7 8, page 5)
(MSI1800T only)
➤ Remove the earthing screw from the bottom hole.
➤ Screw the screw into the top hole.
9.7 Connecting the MCR-7 or MCR-9 remote control
(accessory)
A
NOTICE!
 Only plug in the connection to the remote control in the remote
port. The device can be damaged by connecting it incorrectly.
 Ensure that the remote control and inverter are supplied with
the same input voltage.
 Follow the instruction manual of the remote control.
➤ Connect the remote control (accessory) to the remote port (fig. 5 2,
page 4).
EN
Connecting the inverter
49