Garmin GHC Manual De Uso página 7

The pattern appears on the remote screen.
2
Select an option:
• If the pattern requires you to choose a direction, select
pattern.
• If the pattern does not require you to choose a direction,
select the programmable key again to begin the pattern.
Using a Key Programmed with Direction Control
1
Bring the boat to a stop and disengage the autopilot.
2
Select the programmable key assigned to the direction
control to toggle between forward and reverse.
Using Man Overboard
Use the Man Overboard (MOB) key on the remote to start the
MOB pattern on the GHC device.
Using MOB
1
Select MOB.
The name MOB and the image of the MOB pattern appear
on the screen of the remote.
2
Select
following the MOB pattern.
Controlling the Autopilot with the Remote
Before you can use your remote to control your autopilot, you
must pair the remote with the GHC device
Engaging and Disengaging Heading Hold
Select STBY/ENGAGE.
Adjusting the Heading
When heading hold is engaged, you can manually adjust the
heading of the autopilot system with the arrow keys on the
or to choose the direction and begin the
or to select the direction and begin
Sailboat Operation
EN–7
(page 4).