Product Specification - Planet Technology FT-80 Serie Manual Del Usuario

9. Product Specification

FT-80x
Model
Fiber Connector
Fiber Mode
Fiber Maximum Distance
Copper Connector
Copper Modes
Packet Forwarding Rate
(64bytes)
DIP switch
Protocols and Standards
Dimensions
Weight
Power
Emission
Temperature
Humidity
Installation
1. Please note FT-806A20/806B20 is designed to work together. It means you must
connect FT-806A20 to FT-806B20 in pair. If both ends are FT-806A20 (or FT-806B20),
or any above model to any 3rd party device, they can't work normally and may
damage the fiber connectors.
2. The FT-802xxx / FT-806xxx series single mode Media Converter provide long
distance support from 15 km to 50km. When shorter distance of single-mode fiber
Note
cable is used, you might need to insert an in-line optical attenuator in the link to
avoid overloading of the receiver.
3. Connecting to the Fast Ethernet products, please refer to the device's Technical
Manual.
4. Consult your dealer for DIN-Rail or Chassis installation.
FT-801 FT-802 FT-802S15
ST SC
Multi-mode
2km 15km
10/100Mbps RJ-45
Full Duplex, auto-negotiation
14880pps @10Mbps; 148810pps @100Mbps
LFP Disable / Enable; FX Full / Half-duplex
IEEE 802.3, 10Base-T
IEEE 802.3u, 100Base-TX, 100Base-FX
97 x 69 x 26 mm (W x D x H)
0.2kg
5VDC, 2A max.
FCC, CE
Operating: 0 ~ 50°C / Storage: -40 ~ 70°C
5% ~ 95% non-condensing
Wall mount, DIN-Rail, Chassis Installation
FT-802S35 FT-802S50
SC
Single-mode
35km 50km
FT-806A20
FT-806B20
SC WDM
20km
1-7