4) Connect hose and safety
chain
•
Attach elbow to the
generator housing on top
of the showerhead.
•
Attach supply hose to
elbow.
•
Secure one end of the
safety chain to the anchor
(on supporting frame).
•
Attach the other end to
the elbow as shown.
5) Install shower head
Push assembled showerhead up
through four (4) openings until
the plugs are clear of the raised
edges on the mounting plate (see
diagram on right). Gradually turn
the showerhead clockwise until it
contacts the stop tabs.
Carefully lower the showerhead
into position. The plugs (4) should
be fully seated in the holes in the
mounting plate.
Installation Procedure (continued)
1
*Same procedure for Legato
Safety Chain
2
6
3
Stop tab
®
1/2" hose