Troubleshooting - Acoustic Research ART7 Instrucciones Del Usuario

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

TROUBLESHOOTING

If anything is missing or damaged, or if your ART7 fails to operate, notify your dealer immediately.
We recommend keeping your original carton and packing materials in case you need to ship the
unit in the future. Contact the Audiovox Consumer Service Center.
Symptom
ART7 Does Not Turn On
No Sound
Remote Control Not Working
iPod Does Not Play
Poor FM Reception
Poor AM Reception
Unstable HD Radio Reception
Table 8: iTunes Tagging Setup
Root Cause
AC power cord not properly
connected
Power not available at wall
outlet
Manual switch not turned on
Power button not turned on
Audio cables not connected
Volume is turned down; -
MUTE- is displayed on the
screen
ART7 not turned on
Auxiliary unit connected to
AUX input has volume set too
low or off.
Remote used from too far away
Batteries in remote not properly
installed
Batteries in remote drained
Insulator tab in place
iPod not properly docked on the
ART7
FM antenna not properly
installed
Environmental factors causing
poor FM reception quality
AM antenna not properly
installed
Environmental factors causing
poor AM reception quality
Poor FM reception to affect he HD
Radio recep ion
27
What to Do
Check AC power cord has
proper connection.
Check fuse/circuit breaker at
home is turned on.
Check manual switch on the
rear panel is turned on.
Press the power button to see
if the display lights up.
Verify audio cables are
connected properly.
Press Mute; Turn volume up.
Press the power button to turn
the unit on.
Increase volume of auxiliary
unit connected to AUX input
until sound is heard; make sure
external source is "On".
Move remote closer to the
ART7.
Make sure the batteries are
installed correctly.
Change batteries in he remote
control.
Remove the plastic insulator
tab near battery.
Make sure the correct adaptors are
used for your iPod and check the
connections.
Verify FM antenna is
connected properly or try
moving antenna to achieve
better reception.
You may be in an area with
weak FM signals.
Verify AM antenna is
connected properly or try
moving antenna to achieve
better reception.
You may be in an area with
weak AM signals.
HD Radio reception requires good
FM reception.

Publicidad

Tabla de contenido
loading

Tabla de contenido