Main View - Pfannenberg ICPlus915 Instrucciones De Uso

English

1. Main view

In main view, the target display shows the value measured by the thermoregulation probe.
Following table explains the meaning associated to LEDs.
Icon Description
Alarm
H
Humidity
Relay of
compressor
2
Relay of alarm
Temperature
P
Pressure
Decimal point
NOTE:
Permanently on: alarm active
Flashing: alarm acknowledged
Off: otherwise
Permanently on: displays a humidity
Flashing: reduced set active and displays a humidity
Compressor is active
Permanently on: alarm output active
Flashing: a delay, a protection or a locked start-up
Off: otherwise
Permanently on: displays a temperature
Flashing: reduced set active, displays a temperature or
no unit of measure selected
Permanently on: displays a pressure
Flashing: reduced set active and displays a pressure
Permanently on: decimal point
Flashing: Soft Start active
Off: otherwise
When switched on, the device performs a Lamp Test; the display
and LEDs will flash for several seconds to check that they all
function correctly.
70040-125_01-_.docx
ON
3