Troubleshooting Common Problems - CDP Zaphir CDP2000 Manual De Instrucciones

EN
3.5. Please follow instructions carefully. If the breath tester is not used
during a long period of time, disregard the results of the first two
tests; the results could be erroneous. Always carry out a second
validation test to confirm the result.
3.6. For a proper maintenance, always keep the device in a dry and well
ventilated place, in the protective case provided with the product.
3.7. Under normal conditions of use, the useful life of the sensor exceeds
2 years.
3.8. If necessary, use a clean cloth to clean it. Don't use water, solvent
or conventional cleansers, since these could damage the breath
tester.

Troubleshooting common problems:

FAILURE
The screen
does not turn on
It does not detect
the presence
of alcohol
The screen shows
"FFF"and it shuts
down
automatically
The screen indicates
that there is little
batteryand it shuts
down automatically
10
-
POSSIBLE REASON
Batteries
not placed correctly
Batteries are too old
Failure in the circuit
The warm-up process
has not been completed
Failure in the circuit
Failure in the sensor
Batteries are too old
-
SOLUTION
Insert the batteries
correctly following
the polarity indications
Replace the batteries
Contact technical service
Wait for the warm-up to
conclude
before carrying out the test
Contact technical service
Contact technical service
Replace the batteries
-