Daga E Instrucciones De Uso página 16

ENGLISH
PROBLEM
After the turning the
pad on, the controller
correctly configures the
Free mode, heat setting
1, but the heating
pad doesn't heat up.
The heating pad doesn't
heat up enough.
The control
panel shows
incomprehensible
information.
The lights don't
stop flashing.
The heating pads reach temperatures between 65º and 75º C at their
maximum position. This data should serve as a guideline. Monitoring
is carried out in laboratories, according to the procedure in the UNE-
EN 60335-2-17 directive.
16
TÉ R MICAS2-ALL.indb 16
SOLUTION
If you do not feel heat, cover it with
a blanket, towel or thick cloth, place
the regulator at the maximum position
and wait 45 minutes. If this does not
work, contact our authorized technical
service center. Tests done with the
heating pad uncovered or outdoors
are not reliable because they can
give erroneous heat evaluations.
If the heat is not sufficient at its
maximum position, we recommend
you place it directly on the skin,
covering the other side with a towel or
similar item, this way impeding that
the heat is released into the air.
The controller could have found
an anomaly in the start-up and
blocked the heating pad's operation
for safety purposes. Turn the
controller off and on again. If the
anomaly persists, please contact our
authorized technical service center.
15/03/10 16:17