Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
2
:
Set the filing angle (2) – to sharpen
the left-hand row of cutters, turn the
guide to the right (clockwise).
:
Tighten down the nut.
FG 2
1
3
:
Position the master cutter (3) below
the center of the nut (1).
Aligning the Filing Frame
1
:
Position the round file (1) between
the side plate and depth gauge of
the master cutter by swinging and
lifting the filing frame.
2
1/10 ø
:
Turn the adjusting screw (2)
(counterclockwise to lower file –
clockwise to raise file) until about
1/10 of file diameter projects above
the top plate.
English
19
Publicidad
Capítulos
Tabla de contenido
