Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
After TV set has been put in place, connect antenna or cable antenna to the socket
and switch on TV. When picture and sound appear, press P+ or P- for choosing a
desired program and V+ or V- for adjusting volume. If a blue screen appears, press
CHANNEL-CHOOSING button on the remote controller and then press CHANNEL
button to let the arrow point to automatic search function, and then press VOLUME
button for searching. This TV set can memorize the number of channels from 0 to
180. After searching, the TV stops at the channel 0 and is ready for watching.
AV IN
OPERATION INSTRUCTIONS OF PANEL
First insert power plug and then insert antenna or cable antenna into the socket
of antenna.
SWITCH ON AND OFF TV
When press down Power button, power is connected. When press down
Power button again, power is off. When TV is at stage of sleep, it can not be
switched on or off by pressing the power button.
NOTE:
when TV is at stage of sleep, it can be switched on or off by pressing the
sleep button on the remote controller.
CAUTIONS:
In case that electricity is cut when watching TV, switch off the power.
If TV is not watched, please switch off the power. When TV is at stage of sleep,
there is a part of circuit working and consuming electricity.
V-
TV/AV MENU
V+
P-
P+
Publicidad
Tabla de contenido
