Publicidad
Idiomas disponibles
Idiomas disponibles
Connect charge controller to battery
First, disconnect solar panels and connect charge controller to battery. Always connect charge controller to
battery first and remove last. Observe polarity – positive to positive and negative to negative.
Reconnect Solar Panels to Charge Controller
If battery voltage is 14.2 or higher, the GREEN light should be on. If battery voltage is between 13 and 14.2, the
YELLOW LED should be on. If battery voltage is 13 or lower, the YELLOW LED should be on.
If all testing results within the above indicated ranges, solar system is in acceptable range. If Voltage readings
indicate lower ranges, repeat above connections and retest. Finally, it is common to have 12V Battery issues
such as dead cells or non-rechargeable battery problems.
Warranty
This product is covered by a 1 year limited warranty. Sunforce Products Inc warrants to the original purchaser
that this product is free from defects in materials and workmanship for the period of one year from date of
purchase. This warranty does not apply in the event of misuse or abuse and/or repairs and alterations.
To obtain warranty service please contact Sunforce Products for further instruction, at 1-888-478-6435 or email
info@sunforceproducts.com. Proof of purchase required.
®
Coleman
and
are registered trademarks of The Coleman Company, Inc., used under license.
© 2016 The Coleman Company, Inc.
For more information or technical support
Contact: Les Produits Sunforce Products Inc. Montréal, Canada
1-888-478-6435
www.sunforceproducts.com info@sunforceproducts.com
Publicidad
