Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
Operation
1.
See Typical Measurements for illustrations.
2.
See the Test Table for test instructions.
3.
Test the unit on a known functioning circuit or component.
• If the unit does not function as expected on a known functioning circuit, replace the
batteries.
• If the unit still does not function as expected, send the unit to Greenlee for repair.
4.
Take the reading from the unit to be tested. The LEDs illuminate as follows:
LED Table
LED Illuminated
LED 1
LED 2
LED 1 and LED 2
AC of 12 V or more
Other Voltage LEDs
/ Rx
GFCI
* Continuous tone for continuity. Tone for voltage is described above.
DVC-6
Indication
DVC-6
Positive (+) DC
Positive (+) DC
of 12 V or more
of 120 V or more
Negative (–) DC
Negative (–) DC
of 12 V or more
of 120 V or more
AC of 120 V or more
Approximate voltage level
Continuity or voltage present
GFCI test in progress
LED 1
LED 2
LED 1
LED 2
DVC-6 • DVC-10
Tone
DVC-10
None
Continuous
Warbling
—
*
—
DVC-10
7
Publicidad
Tabla de contenido
