Hoover HPWD 140 X Instrucciones De Uso Y Mantenimiento página 38

INSERTING THE APPLIANCE
Safety instructions for installation
Before connecting the appliance to the electrical mains, compare the connection data (voltage and frequency)
indicated on the data plate with the data of the electrical mains.
The data must match, otherwise the appliance may be damaged.
If in doubt, contact a qualified technician.
Make sure that the electrical outlet is easily accessible even after the appliance has been inserted.
The drawer can only be inserted with other appliances with a maximum weight of 40 kg that are provided 50
with adequate cooling ventilation.
For installation of the combination appliance, follow the instructions in the relative use and installation book.
Insertion and installation of this appliance may only be performed by qualified staff who ensure safe operating
conditions.
The drawer is fastened to the cabinet by two screws (mod. HPWD 140) or four screws (mod. HPWD 290) in the
holes of the frame around the edge, and which are visible when the drawer is open.
Insertion space measurements (please see Installation Instructions Booklet)
The dimensions of the niche are obtained from the size of the drawer plus the measuremen ts of the appliance
combined with it.
All measurements are indicated in millimetres.