OHAUS 80500733 Manual De Instrucciones página 3

Find Quality Products Online at:
EN-2
2.2 RS232 Wiring Guidelines
• Do not run more than one cable through the strain relief bushing.
• Do not use the cable that connects to the RS232 pc board to make other
connections.
• Three wire shielded cable Is recommended.
• The strain relief bushing allows a cable diameter from 2 to 6 mm (0.08 to 0.23
inch).
• The terminal block on the RS232 pc board allows a wire size of 0.14 to 1.5 mm
(26 to 16 AWG). Strip the wire ends to 6 mm (0.25 inch).
Figure 2.1 Wire Preparation
• Connect the wires to the terminal block J2 according to the Figure 2.2.
J4 J1
Figure 2.2 RS232 Connections
GlobalTestSupply
www.
RS232 Option Kit
Ground (GND)
Receive (RXD)
Transmit (TXD)
J2
.com
2
sales@GlobalTestSupply.com