Using Your Toaster - Titanium TI-TO4S Manual De Instrucciones

USING YOUR TOASTER

Solid surface countertops can be easily scratched, cracked, scorched, or
damaged, especially when exposed to heat. To prevent damage, the following
precautions should be observed when using this product:
Always use a trivet under heat generating sources such as Slow Cookers,
Toaster Ovens, Skillets, or any other Kitchen Appliance.
Before use remove any packing materials and wipe the body of your toaster
with a damp cloth.
Ensure that before plugging the toaster into the outlet, the bread carriage lever
is in the uppermost position.
Plug the cord into a 220V, 50HZ outlet. Position toaster at least 3 inches away
from wall or rear of counter.
Let the first toasting process take place without inserting any bread to preheat
the new elements and burn off any residue.
Select the desired level of darkness by turning the "1-6" light/dark knob on the
front panel of the toaster to the right for darker toast and to the left for lighter
toast. Your selection should vary based on the moisture content, thickness of
bread, whether fresh or frozen and your darkness preference.
Next, place bread in slot and depress bread carriage lever downwards until it locks.
Carriage lever will not stay down if toaster is not plugged in. The self-adjusting
bread guides will automatically center the bread for browning.
If using the REHEAT or BAGEL function buttons, press the selected button at this time.
The lights around any selected function button will illuminate.
After the desired level of darkness has been reached, the bread will pop up
automatically and is ready for removal from the slots. The bread carriage will return
to its original position and disconnect the elements, ready for the next toasting.
To remove toast, press up on the bread carriage lever to lift toast out of the bread slots.
English / 8