26
EUROPOWER EPX2800/EPX4000
Other important information
Important information
Informations importantes
1.
Register online.
1.
Enregistrez-vous en ligne.
Please register your new
BEHRINGER equipment right after you purchase it by
temps d'enregistrer votre produit BEHRINGER aussi vite
visiting behringer. com. Registering your purchase using
que possible sur le site Internet behringer. com. Le fait
our simple online form helps us to process your repair
d'enregistrer le produit en ligne nous permet de gérer
claims more quickly and efficiently. Also, read the terms
les réparations plus rapidement et plus efficacement.
and conditions of our warranty, if applicable.
Prenez également le temps de lire les termes et conditions
de notre garantie.
2.
Malfunction.
Should your BEHRINGER dealer
not be located in your vicinity, you may contact the
2.
Dysfonctionnement.
BEHRINGER distributor for your country listed under
de revendeur BEHRINGER près de chez vous, contactez le
"Support" at behringer. com. Should your country not
distributeur BEHRINGER de votre pays : consultez la liste
be listed, please check if your problem can be dealt with
des distributeurs de votre pays dans la page "Support" de
by our "Online Support" which may also be found under
notre site Internet behringer. com. Si votre pays n'est pas
"Support" at behringer. com. Alternatively, please submit an
dans la liste, essayez de résoudre votre problème avec notre
online warranty claim at behringer. com BEFORE returning
"aide en ligne" que vous trouverez également dans la section
the product.
"Support" du site behringer. com. Vous pouvez également
nous faire parvenir directement votre demande de réparation
3.
Power Connections.
Before plugging the unit
sous garantie par Internet sur le site behringer. com AVANT de
into a power socket, please make sure you are using the
nous renvoyer le produit.
correct mains voltage for your particular model. Faulty fuses
must be replaced with fuses of the same type and rating
3.
Raccordement au secteur.
without exception.
cet équipement au secteur, assurez-vous que la tension
secteur de votre région soit compatible avec l'appareil.
Veillez à remplacer les fusibles uniquement par des modèles
Aspectos importantes
exactement de même taille et de même valeur électrique —
sans aucune exception.
1.
Registro online.
Le recomendamos que
registre su nuevo aparato BEHRINGER justo después de
su compra accediendo a la página web behringer. com.
El registro de su compra a través de nuestro sencillo
sistema online nos ayudará a resolver cualquier
incidencia que se presente a la mayor brevedad posible.
Además, aproveche para leer los términos y condiciones de
nuestra garantía, si es aplicable en su caso.
2.
Averías.
En el caso de que no exista un distribuidor
BEHRINGER en las inmediaciones, puede ponerse en
contacto con el distribuidor BEHRINGER de su país,
que encontrará dentro del apartado "Support" de nuestra
página web behringer. com. En caso de que su país no
aparezca en ese listado, acceda a la sección "Online Support"
(que también encontrará dentro del apartado "Support" de
nuestra página web) y compruebe si su problema aparece
descrito y solucionado allí. De forma alternativa, envíenos a
través de la página web una solicitud online de soporte en
periodo de garantía ANTES de devolvernos el aparato.
3.
Conexiones de corriente.
Antes de enchufar
este aparato a una salida de corriente, asegúrese de que dicha
salida sea del voltaje adecuado para su modelo concreto.
En caso de que deba sustituir un fusible quemado, deberá
hacerlo por otro de idénticas especificaciones, sin excepción.
behringer.com
Prenez le
Si vous n'avez pas
Avant de relier
FEDERAL COMMUNICATIONS
COMMISSION COMPLIANCE
INFORMATION
EUROPOWER
EPX2800/EPX4000
BEHRINGER USA, Inc.
Responsible party name:
Address:
18912 North Creek Parkway,
Suite 200 Bothell, WA 98011,
USA
Phone: +1 425 672 0816
Phone/Fax No.:
Fax: +1 425 673 7647
EUROPOWER EPX2800/EPX4000
complies with the FCC rules as mentioned in the following paragraph:
This equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to part 15 of the FCC Rules. These limits are designed
to provide reasonable protection against harmful interference in a residential
installation. This equipment generates, uses and can radiate radio frequency
energy and, if not installed and used in accordance with the instructions, may cause
harmful interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment does cause
harmful interference to radio or television reception, which can be determined
by turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
•
Reorient or relocate the receiving antenna.
•
Increase the separation between the equipment and receiver.
•
Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
•
Consult the dealer or an experienced radio/TV technician for help.
This device complies with Part 15 of the FCC rules. Operation is subject to the
following two conditions:
(1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may
cause undesired operation.
Important information:
Changes or modifications to the equipment not expressly approved by BEHRINGER
USA can void the user's authority to use the equipment.
Quick Start Guide
27
behringer.com