Components And Description; Configuration - newchef NW- 400 Manual De Instrucciones

COMPONENTS AND DESCRIPTION

1. Appliance
2. Cover with citrus cutter
3. Removable juicing cones base holder
4. Removable juicing cones
5. Power switch (ON/OFF)
6. Receptacle for juice collection and removable base
7. Compartment to store the power cable

CONFIGURATION

1. Place the motor base on a clean, stable, and dry surface.
2. Place the juicing cones base holder on top of the motor base sliding it into
the slots located on the rear part of the motor base. After this, press fi rmly
until it fi ts into place.
3. Place the juicing cones on top of the transmission shafts (8).
4. Insert the motor lock head into the slots in the rear part of the juicing cones
base holder.
5. Insert the receptacle for juice collection into the rails in the motor base (6).
Slide in until it locks in position.
6. Place the citrus-cutting cover on the upper part of the juicing cones base
holder adjusting it to the holes (9).
7. Connect the power cable. Your Licuadora NW-400 is now ready for you to
use!
21