Technical Data - Macrom Syn Power 2.050x Manual De Instrucciones

Power IHF 202
RMS Power at (12.5 Volts DC)
at 1 kHz < 0.08 % THD at 4 Ohm
at 1 kHz < 0.5 % THD at 2 Ohm
at 1 kHz < 0.5 % THD Mono at 4 Ohm
Dynamic Power at (14.4 Volts DC)
at 1 kHz < 0.08 % THD at 4 Ohm
at 1 kHz < 0.5 % THD at 2 Ohm
at 1 kHz < 0.5 % THD Mono at 4 Ohm
High pass control,
Low pass control,
Crossover slope
Response in frequency +/- 1 dB
Total harmonic distortion
Weighted IHF A Signal-Noise Ratio
Input sensitivity - Impedance
Loudspeaker impedances
Stereo
Mono
Power supply
Weight
Dimensions
Due to the continual incorporation of improvements in this product, the characteristics and
design may be subject to variation without prior notice.

TECHNICAL DATA

9
250 W
2 x 55 W
2 x 80 W
1 x 160 W
2 x 60 W
2 x 100 W
1 x 200 W
(30-600) Hz
(30-600) Hz
12 dB/Octave
10 - 50.000 Hz
0.08%
> 100 dB
200-4000 mV/22 kOhm
min. 2 Ohms
min. 4 Ohms
14.4 V DC
(11 - 16 V permissible)
2,4 kgrs
212(i) x 65(h) x 225(p) mm