Tabla de contenido
Publicidad
Anleitung_RT_HP_1855_TR_SPK7:_
8.2.3 Cleaning the nozzle (Fig. 17)
Use the supplied wire (11) to clean clogged nozzles.
8.2.4 Electric motor
The electric motor is equipped with a motor circuit
breaker switch. When the motor starts to run hot, it is
cut out by this switch. Switch off the machine.
Wait 5-10 minutes before using the device again. Try
to determine the cause of the fault. If the problem
repeats itself, please contact a customer service
center.
8.3 Ordering replacement parts:
Please quote the following data when ordering
replacement parts:
Type of machine
Article number of the machine
Identification number of the machine
Replacement part number of the part required
For our latest prices and information please go to
www.isc-gmbh.info
9. Storage
Store the equipment and accessories out of children's
reach in a dark and dry place at above freezing
temperature. The ideal storage temperature is
between 5 and 30 °C. Store the electric tool in its
original packaging.
10. Disposal and recycling
The unit is supplied in packaging to prevent its being
damaged in transit. This packaging is raw material
and can therefore be reused or can be returned to
the raw material system.
The unit and its accessories are made of various
types of material, such as metal and plastic.
Defective components must be disposed of as
special waste. Ask your dealer or your local council.
24.09.2010
10:35 Uhr
Seite 19
GB
19
Publicidad
Tabla de contenido
