ENGLISH
enables the heat to be felt just 15 minutes after turning on the
control knob, regardless of the selected temperature. Set the tem-
perature to a lower level after this time.
The control should be set to its minimum temperature (level 1)
when using the product for extended periods of time. Try to avoid
excessive exposure to heat from high temperatures The posi cio n
of the highest temperatures control control (level 3) should be used
only for the time necessary to obtain a comfortable temperature,
and the temperature should be gradually lowered to a lower position
after this threshold has been reached.
TROUBLESHOOTING GUIDE: Possible operational
problems
The electric blanket comes with a safety system to prevent it from
overheating with an automatic disconnection function.
PROBLEM
After turning on the
electric blanket, it
does not warm up or
only heats up a little
The regulator control
does not light up
when the switch is
turned on
After a certain
operation time, the
product temperature
seems to reduce.
PRODUCT DISPOSAL, CONSERVATION AND MAIN-
TENANCE
PRODUCT CONSERVATION
Unplug the product when you do not intend to use it for an exten-
ded period of time to prolong its shelf-life. Store it in its original
packaging in a dry place, trying to fold it as little as possible and
preventing the formation of creases.
RECOMMENDATION
Make sure that the regulator is properly
connected to the product.
If the electric blanket is not heating up,
cover it with a bed cover, or duvet, placing
the regulator in the maximum position
and wait for 30 minutes. If it continues
to not heat up after this time, contact an
authorised service technician. Checks carried
out with the electric blanket partially uncovered or
in the open air are not reliable, as these may result
in erroneous perceptions of the heat.
Check that the mains has voltage, and that
the product
is properly plugged in.
seconds
11