Schneider Airsystems RF 6 XG Manual De Instrucciones página 4

GB
RF 6 XG / RF 12 MG
Table of contents - Part 1
1.1 General information ..................
1.2 Scope of delivery ......................
1.3 Conventional use ......................
1.4 Technical data ..........................
1.5 Components.............................
1.6 Commissioning .........................
1.7 Replacing the rubber gasket .......
The specified illustrations appear at the be-
ginning of the Operating Instructions.
1.1 General information
Observe the safety instructions!
Read the Instruction Manual!
1.4 Technical data
Measuring range RF 6 XG
Maximum permitted pressure RF 6
Hose length RF 6 XG
Measuring range RF 12 MG
Maximum permitted pressure RF 12 MG
Hose length RF 12 MG
Working temperature range
Recomm. hose diameter (interior) with L= 10 m
Overall dimensions (without hose) width x depth x height
Weight
1.5 Components
01 Plug nipple
04 Pressure gauge
05 Valve connector
06 Valve connector
09 Pushbutton +
10 Pushbutton -
1.6 Commissioning
Note: Read and memorise part 2 of the
instruction manual!
I/ 2
Note: Read and memorise part 2 of the
instruction manual!
2
Subject to technical modifications. Illustra-
tions may deviate from the original.
2
2
1.2 Scope of delivery
2
– Tyre pressure gauge (1)
2
– Instruction manual
2
1.3 Conventional use
2
The tyre pressure gauges are suitable for fill-
ing and setting of air-filled tyres using com-
pressed air or nitrogen.
Any other type of use is considered contrary
to the intended use.
1.7 Replacing the rubber
gasket
See Fig. 3a.
1. Unscrew the sleeve nut (item 11) from
the valve connector (item 06).
2. Remove the clamping sleeve (item 13)
together
(item 12).
3. Replace the rubber gasket (item 12) and
clamping sleeve (item 13) with a new
rubber gasket and clamping sleeve.
4. Assemble in reverse order.
0.7 - 6 bar
7.5 bar
0.6 m
0.7 - 12 bar
15 bar
1.5 m
-20 - + 60 °C
9 mm
100 x 65 x 300 mm
0.8 kg
with the rubber gasket